COMPUTER REPAIR COURSE

                 HOW TO REPAIR COMPUTER                                                                             

Two Methods:Computer freezing Blue Screen of Death     
Any abnormality in the integrated components of a computer can prove harmful to its performance, but some general computer issues can be addressed at personal level. There are effective computer repair tips and tricks which can be implemented to resolve these problems. Computer repair is important because we are becoming dependent on it for every personal and professional task. There is a variety of problems; some are simple while others are complicated. However, you can repair your system on your own by following some tips and tricks.
        

Method 1 of 2: Computer freezing

       

Computers may freeze on account of any hardware or software issue, so here you need to understand the exact reason behind it. Notice if the issue started when you connected any hardware peripherals like a printer or scanner; then it might be due to a driver conflict. If the issue occurred after assembling a new hard drive, then it might be due to insufficient power or too much heat. Follow the troubleshooting pattern below to repair your computer, if such problems occur.

 

1

Give your computer a bit of rest. If you leave your computer on all the time, you can often fix a problem by unplugging it, waiting at least 30 seconds, and plugging it back in. By cutting off the power to the motherboard, it allows the hardware to reset and the memory to clear.

2

Determine if your computer becomes too hot. You will need to take a look inside for this. Remember that any time you need to open up your computer cabinet, shut down your computer and unplug it. If you have long hair, tie it back. Take off any jewelry that might get in the way. Also avoid wearing any clothing that produces a lot of static, as a spark can damage hardware and cause intermittent, hard-to-troubleshoot problems.   

3

Open the cabinet of your computer and check the temperature of the metal chassis. If it’s hot, then certainly there is some thermal problem. Gently examine the front and rear fans and blow out any dust. You can apply a clean cloth to dust out hidden particles. Remember: Your computer must be shut down while you're cleaning inside it.       

• If you have more than one hard drive in your computer, avoid installing them right next to each other in the chassis; this makes them more prone to heat failure. To install an extra hard drive in a wide slot, such as the slot that holds your CD-ROM or DVD-ROM drive, you can buy mounting brackets at a store that sells computer parts.

      

• Even if your computer isn't having problems, it's a good idea to clean the fans regularly.

     

• Before you close up the case, check all the cables and make sure everything is still plugged in. If you have to reset a video card or a stick of memory, avoid applying heavy pressure to the motherboard as this can damage it www.kamalje.blogspot.com